Clear Safety & Security Film offers round-the-clock, passive protection against various threats. This high-performance film ensures the safety of your valuable equipment and the well-being of your employees without altering the appearance of your windows.
Madico's Clear Safety & Security Film provides numerous benefits to enhance the safety and security of your property while maintaining a clear view through your windows.
Holds shattered glass together to protect against storms, forced entry, and vandalism.
Invisible protection that doesn't alter the look of your windows.
Film replacement is more economical than safety glass in the event of an impact.
Blocks harmful ultraviolet rays without changing the appearance of the glass.
Meets or exceeds safety standards set by the U.S. Consumer Product Safety Commission and Underwriters Laboratories.
Offers four versatile options to effectively absorb and disperse energy, ensuring glass fragments are contained during breakage to fit your specific needs.
Madico's Clear Safety & Security Film is designed to provide 24-hour protection against threats such as vandalism, intrusion, severe weather, and accidents involving broken glass. The film holds shattered glass together, preventing dangerous fragments from causing injury or damage. It is cost-effective, as it is less expensive to replace than safety glass, and it maintains a clear, invisible appearance while blocking harmful ultraviolet rays. Extensively tested and meeting safety glazing criteria by the U.S. Consumer Product Safety Commission and Underwriters Laboratories, this film comes with a manufacturer's warranty in North America. Additionally, the Wet Glaze Anchoring System enhances its effectiveness by absorbing and dispersing energy during glass breakage, keeping glass fragments contained.
| Product specs | |
| Visible Light Transmitted | 87% |
| Visible Light Reflected External | 9% |
| Visible Light Reflected Internal | 9% |
| Visible Light Glare Reduction | 2% |
| Total Solar Energy Transmitted | 75% |
| Total Solar Energy Reflected External | 8% |
| Total Solar Energy Absorbed | 18% |
| Shading Coefficient (SC) | 0.92 |
| Solar Heat Gain Coefficient (SHGC) | 0.80 |
| U Factor | 1.03 |
| UV Rejection | ≥ 99% |
| Emissivity | 0.86 |
| Light to Solar Gain | 1.08 |
| Total Solar Energy Rejected (TSER) | 20% |
| IR Rejection (tested range 780 to 2500 nm) | 31% |
| Infrared Energy Rejection (IRER) | 23% |
| Film Thickness | 0.0045” |
| Structural Component | 0.004” |
| Structure | Single Ply |
| Adhesive Type | Acrylic Pressure Sensitive |
| Tensile Strength | 25,000 PSI Avg. MD/TD |
| Break Strength | 100 lbs. Per Inch (Width) |
| Peel Strength | 5 to 6 lbs. Per Inch |
| Product specs | |
| Visible Light Transmitted | 88% |
| Visible Light Reflected External | 9% |
| Visible Light Reflected Internal | 9% |
| Visible Light Glare Reduction | 1% |
| Total Solar Energy Transmitted | 75% |
| Total Solar Energy Reflected External | 8% |
| Total Solar Energy Absorbed | 18% |
| Shading Coefficient (SC) | 0.93 |
| Solar Heat Gain Coefficient (SHGC) | 0.81 |
| U Factor | 1.05 |
| UV Rejection | ≥ 99% |
| Emissivity | 0.91 |
| Light to Solar Gain | 1.09 |
| Total Solar Energy Rejected (TSER) | 20% |
| IR Rejection (tested range 780 to 2500 nm) | 32% |
| Infrared Energy Rejection (IRER) | 23% |
| Film Thickness | 0.008” |
| Structural Component | 0.007” |
| Structure | Single Ply |
| Adhesive Type | Acrylic Pressure Sensitive |
| Tensile Strength | 25,000 PSI Avg. MD/TD |
| Break Strength | 175 lbs. Per Inch (Width) |
| Peel Strength | 5 to 6 lbs. Per Inch |
| Product specs | |
| Visible Light Transmitted | 88% |
| Visible Light Reflected External | 8% |
| Visible Light Reflected Internal | 8% |
| Visible Light Glare Reduction | 1% |
| Total Solar Energy Transmitted | 76% |
| Total Solar Energy Reflected External | 7% |
| Total Solar Energy Absorbed | 18% |
| Shading Coefficient (SC) | 0.93 |
| Solar Heat Gain Coefficient (SHGC) | 0.81 |
| U Factor | 1.02 |
| UV Rejection | ≥ 99% |
| Emissivity | 0.87 |
| Light to Solar Gain | 1.09 |
| Total Solar Energy Rejected (TSER) | 19% |
| IR Rejection (tested range 780 to 2500 nm) | 32% |
| Infrared Energy Rejection (IRER) | 23% |
| Film Thickness | 0.008” |
| Structural Component | 0.007” |
| Structure | Single Ply |
| Adhesive Type | Acrylic Pressure Sensitive |
| Tensile Strength | 25,000 PSI Avg. MD/TD |
| Break Strength | 175 lbs. Per Inch (Width) |
| Peel Strength | 5 to 6 lbs. Per Inch |
| Product specs | |
| Visible Light Transmitted | 86% |
| Visible Light Reflected External | 9% |
| Visible Light Reflected Internal | 9% |
| Visible Light Glare Reduction | 3% |
| Total Solar Energy Transmitted | 73% |
| Total Solar Energy Reflected External | 8% |
| Total Solar Energy Absorbed | 20% |
| Shading Coefficient (SC) | 0.90 |
| Solar Heat Gain Coefficient (SHGC) | 0.79 |
| U Factor | 1.05 |
| UV Rejection | ≥ 99% |
| Emissivity | 0.90 |
| Light to Solar Gain | 1.09 |
| Total Solar Energy Rejected (TSER) | 21% |
| IR Rejection (tested range 780 to 2500 nm) | 36% |
| Infrared Energy Rejection (IRER) | 26% |
| Film Thickness | 0.0095” |
| Structural Component | 0.008” |
| Structure | Multi-Ply Laminate |
| Adhesive Type | Acrylic Pressure Sensitive |
| Tensile Strength | 25,000 PSI Avg. MD/TD |
| Break Strength | 200 lbs. Per Inch (Width) |
| Peel Strength | 5 to 6 lbs. Per Inch |
| Product specs | |
| Visible Light Transmitted | 87% |
| Visible Light Reflected External | 9% |
| Visible Light Reflected Internal | 9% |
| Visible Light Glare Reduction | 3% |
| Total Solar Energy Transmitted | 75% |
| Total Solar Energy Reflected External | 8% |
| Total Solar Energy Absorbed | 18% |
| Shading Coefficient (SC) | 0.92 |
| Solar Heat Gain Coefficient (SHGC) | 0.80 |
| U Factor | 1.03 |
| UV Rejection | ≥ 99% |
| Emissivity | 0.87 |
| Light to Solar Gain | 1.08 |
| Total Solar Energy Rejected (TSER) | 20% |
| IR Rejection (tested range 780 to 2500 nm) | 33% |
| Infrared Energy Rejection (IRER) | 23% |
| Film Thickness | 0.014” |
| Structural Component | 0.0135” |
| Structure | Multi-Ply Laminate |
| Adhesive Type | Acrylic Pressure Sensitive |
| Tensile Strength | 25,000 PSI Avg. MD/TD |
| Break Strength | 325 lbs. Per Inch (Width) |
| Peel Strength | 5 to 6 lbs. Per Inch |
This brochure provides comprehensive information on Madico's range of safety and security window films, detailing their benefits, applications, and the rigorous testing they have undergone to meet industry standards.
DownloadDownload the Clear 7 Mil Exterior Design Guide to discover comprehensive specifications, benefits, and installation details of Madico's Clear Safety & Security Film designed for exterior applications.
DownloadDownload the Clear 7 Mil Design Guide to access detailed information on the product's specifications, performance measurements, and benefits, including protection against vandalism, severe weather, and UV exposure.
Download